spitfires
[Top] [All Lists]

[Spits] Nipondenso Alternator Installation

Subject: [Spits] Nipondenso Alternator Installation
From: bill at gingerich.us (Bill Gingerich)
Date: Tue, 18 Jan 2011 09:19:37 -0600
References: <003101ca874a$6cef1d20$46cd5760$@net> <009401cbb705$cd916b10$68b44130$@net>
Dan,

I can't help you with the 3 connections, but have another thought.  Be sure
to run a new, heavier gauge charging wire to the solenoid.  The stock wire
isn't very large, and may not handle the added output of a bigger alternator
if the demand is high (dead battery?) I don't remember what gauge I used
when I put in the 65 amp Delco, but wire capacity info is easy to find.

BillG
MN

-----Original Message-----
From: spitfires-bounces at autox.team.net
[mailto:spitfires-bounces at autox.team.net] On Behalf Of Daniel Parrott
Sent: Tuesday, January 18, 2011 5:50 AM
To: 'Spitfire list'
Subject: [Spits] Nipondenso Alternator Installation

Listers;

Has any ever installed one of those high-output Nipondenso alternator in a
GT6?  The unit has the large stud on one side, with a circular area with
three spade fittings in a "pi" configuration marked  "D" (across the top),
"IG" on the left leg, and "L" on the right leg.

I understand that the large stud receives the large main brown wire, but
what of the others?


Dan Parrott
Savannah, Ga
1980 Triumph Spitfire "PJ"
1972/1978 Spit Six Project car "Joseph"
1957 Chevy Bel Air "Mayflower"
_______________________________________________

Spitfires at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spitfires/bill at gingerich.us

<Prev in Thread] Current Thread [Next in Thread>