Not only can you fit spacers, but you should. I would recommend that they
be made of rubber to absorb vibrations to keep the thing from shaking the
seams and self destructing.
Joe
-----Original Message-----
From: spitfires-bounces@autox.team.net
[mailto:spitfires-bounces@autox.team.net] On Behalf Of s1500@comcast.net
Sent: Friday, June 11, 2010 5:32 AM
To: spitfires@autox.team.net
Subject: [Spits] New tank - slight hitch
With some elbow grease, I got the new fuel tank in, but with one hitch.
Always a hitch with new parts.
The Fuel filler cap doesn't fit on quite right. At best, it sticks out a
third of an inch from where it should be. It seems the fuel filler neck on
the tank is a bit far forward. Did my best to fit things together so as to
no fuel leaks when I fill-up, but I think I can do better. I'm not sure if
the neck is exactly advanced forward a bit too far, or at some weird angle
where the back of the neck area isn't giving the filler cap enough room.
Tried loosening the top bolts to change the angle a bit, to no avail.
In theory, could one put some washers as shims to overall move the tank back
a bit to line things up right? That's gonna be fun on some of the
hard-to-reach zones between tank & car for bolt holes.
_______________________________________________
Spitfires@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spitfires/spitlist@cox.net
_______________________________________________
Spitfires@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|