Greetings...
I am mounting my hardtop for the first time and have a few questions :)
A. It appears from various illustrations that the two spacer tubes at the
front mount with the flanged end up - against the hardtop.. Correct?
B. What bolt is needed for the front connection (through the spacer tube)
I see and read references to both a headed bolt and an all-threaded
bolt. The front bolts that I have are headed. Which is supposed to be
used?
C. I have read several comments re the "underside of the hardtop where it
rests on the read edge." Apparently the top can damage the paint on the
rear deck. I have the "seals" that are noted in the various catalogs. I
have read that different people have done different things to protect
this area - everything from thicker "seals" to using the "c" shaped
chrome door edge guard molding to trim the bottom edge. Suggestions?
Many thanks!!
Harve
Harve Thorn
NASS # 79
_______________________________________________
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
|