spitfires
[Top] [All Lists]

Re: [Spits] Spitfire Header

To: "'Chris King'" <cbking@alum.rpi.edu>, <spitfires@autox.team.net>
Subject: Re: [Spits] Spitfire Header
From: "Daniel parrott" <parrotthead01@comcast.net>
Date: Sat, 18 Aug 2007 17:48:03 -0400
I agree.  I sprung for a Bell stainless steel 4-2-1 header from Rimmer
Brothers that I sent on to get ceramic coated, inside and out.  I've been
very pleased, especially here in Savannah, Ga.

-----Original Message-----
From: spitfires-bounces@autox.team.net
[mailto:spitfires-bounces@autox.team.net] On Behalf Of Chris King
Sent: Saturday, August 18, 2007 1:03 PM
To: spitfires@autox.team.net
Subject: Re: [Spits] Spitfire Header

I second the one from Ted. I bought one for my 1500 Midget, and it works
well and fit well. The one I got was routed specifically for the Midget,
and had a Maniflow tag on it when I got it. Quality parts, though the
one I bought was mild steel.
 
I agree, I probably should have sprung for the ceramic coating. It keeps
the header looking better longer (mine's got some surface rust on it),
and on hot days after a run on the interstate, I'll sometimes have
problems with the fuel boiling in the float bowls. I understand the
ceramic coating will radiate less heat.
 
-=Chris

Chris King
http://home.comcast.net/~kvcbk/ 

 <-----Original Message----->

                 From: The Family Jefferson [pnhnt@insight.rr.com]
Sent: 8/18/2007 9:12:20 AM
To: JHMDDS@aol.com
Cc: spitfires@autox.team.net
Subject: Re: [Spits] Spitfire Header 

James, 

I bought a header from Ted for my 75 Spitfire 1500 when I converted to
dual 
SU's. The other stainless steel headers Considering Rimmer Bros. was
about 
$300 (plus shipping) and Spitbits was $400 (plus all that other stuff) I
went with Ted. 

When I installed them, I was told I should have gotten the ceramic
coated 
version, but those are a bit more. 

R/ 
Howard 
Pickerington, Ohio 

-----Original Message----- 
From: spitfires-bounces@autox.team.net 
[mailto:spitfires-bounces@autox.team.net] On Behalf Of JHMDDS@aol.com 
Sent: Saturday, August 18, 2007 1:13 AM 
To: spitfires@autox.team.net 
Subject: [Spits] Spitfire Header 

Help. I'm looking for a high preformance exhaust header (free flow) for
my 
1300cc Spitfire project. My mechanic says stay away from
Pacesetter/Monza 
parts. I bought a great Strebo header but fitting is a problem. He says
I 
need a good 4 into 2 into to 1 or "Tri Y" type. I have found one from
Ted 
and one from APT, both are $275. I'm not against paying for these I just
was interested to find out if this is what I should get and if I can 
possibly get one for at a better price. 


. 
_______________________________________________
Spitfires mailing list
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
_______________________________________________
Spitfires mailing list
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

<Prev in Thread] Current Thread [Next in Thread>