The GT6 Workshop Manual from Standard-Triumph describes a procedure
for the process of replacing these seals. A quick summary is as follows:
1. Peal back the head liner to gain access to two bolts fastening the
top of the windshield frame to the top of the car. Remove the bolts.
2. Remove the three bolts that fasten the bottom edge of the
windshield frame to the car body.
Very little additional information is offered. Answers to the
following concerns would be greatly appreciated:
1. Will removal of the five bolts mentioned above provide enough
clearance to remove and replace these seals?
2. Is prying necessary?
3. "Pealing back" a 38 year old headliner could easily require
replacement of the headliner. The Triumph-Standard manual has
instructions for this replacement. Any suggestions gained from
experience?
Jim Baustian
jbaustian@cox.net
_______________________________________________
Spitfires mailing list
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
|