Hello
A person name Joe wrote in connection of the subject mention above:
(((Better still, don't punch holes at all. Remove the posts (pins) and
apply the letters with 3M double stick trim tape. Then you don't have to
worry about water seeping through the holes.))
Can someone comment on going that route ((Using 3M double stick trim tape))
for installing the 7 letters TRIUMPH since all letter have cavity in the
back, and will only stick on the edge back side of the letters, may be it is
o.k. But I would certainly appreciate having other person that has gone that
route. But it looks like a very bright idea.
Have a nice day
P-Ernest
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|