spitfires
[Top] [All Lists]

Re: Determining rear end rattle?

To: Spitfire Mailing List <spitfires@autox.team.net>
Subject: Re: Determining rear end rattle?
From: Henry Stike <stiker2126@yahoo.com>
Date: Fri, 1 Sep 2006 11:48:54 -0700 (PDT)
They actually made a Spitty that doesn't rattle? I'll
bet they even made one in which every Lucas Electrical
part works outstandiing.. :-)
Good Luck!

--- s1500@comcast.net wrote:

> Driving the Spit lately has been going very well. No
> breakdowns, no major gas consumption, none of that.
> 
> But what's cheesing me off is the rattle I can't
> seem to get rid of. I've cured the other rattles on
> the car, which makes the rear one that much more
> noticeable. 
> 
> The rattle sounds like metal on metal(but no
> clanging or anything like that), and much more
> noticeable with the top up(okay, that one's
> obvious).  A few weekends ago, I removed the rear
> cockpit panel, and tightened up the fuel tank
> mounting bolts. No effect. What I didn't check(and
> it will be tough) is the vapor separator tank. Would
> that be big enough to cause some rattles? If so, I
> guess I could wrap up the clamp in tape.
> 
> But what else could be doing it? It doesn't seem
> drivetrain related. The rear bumper's on fine, spare
> tire's bolted down, trunk latch secure, the exhaust
> mounting bolts seem fine, etc. I even took out my
> big plastic toolbox that's wedged between the rear
> cockpit panel & turn signal, but no dice. I think I
> might transfer my tools & spare parts to cardboard
> boxes & distribute them evenly.
> 
> One by one I'm gonna narrow it down. 
Tired of spam?  Yahoo! Mail has the best spam protection around 


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>