Probably a dumb question, but overdrives are new to me.
I just got a 79 spitfire with the J type OD. The car is not currently
running. While
I have the interior apart, I decided to test the wiring on the overdrive.
I'm getting
current down to the solenoid with the OD on and the car in third or fourth
gear as
I should be. However I cannot hear the solenoid "click" on and off as I
shift from
third to first (and yes the test light does properly go out as I shift to
first).
Bum solenoid or does the engine need to be running for the solenoid to
actually
make an audible sound?
Thanks!
Greg
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|