At 09:15 PM 3/7/2006 -0500, Greg Rowe wrote:
>Now that I have my new, rust free spitfire, I would like to keep it that way.
>(First thing, no more
>driving on snowy days with the roads salted!) There is some very light
>surface rust on the floor plans, top and bottom. I'm going to wire brush it
>off, but for protection, should I paint POR15
>on both sides of the pan? Bottom only and use a good quality paint like
>Rustoleum on top? Or
>is POR15 overkill for a car that will usually only see dry weather?
I can't say which is best, but if you are working on the floorpans, inspect them
carefully for cracks around the seat attachment points.
Doug Braun
'72 Spit
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|