I made a small aluminum bracket that attached at the upper wishbone
(sorry I don't have a good pic of this). Basically just an L shaped
bracket with a hole in the end that the bottom of the spring is
attached to. I have two coil springs (one nested inside the other) as
a safety measure. Both are pretty stiff on thier own, together, they
give me a nice firm pedal. I've never had a stuck throttle, and I am
doing what I can to insure I never do.
John
On 3/2/06, Tim Schuh <tim@ugly.net> wrote:
> What do you have your throttle return spring attached to? My current
> trottle setup should allow full throttle once I've trimmed the throttle
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|