Install the crank setup, then the channels, then drop the glass
in to the very bottom of the channel NOT connected
to the crank. Then install the seals. If you put the seals
in first the glass will never go in. Then loosen the crank and
connect the glass
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: "Larry T" <llst@shaw.ca>
To: <spitfires@autox.team.net>
Sent: Monday, May 16, 2005 1:49 AM
Subject: MK3 Door reassembly
> Does anyone have a routine for stuffing the door guts back into the door.
I
> would think the front and back channels would be the items to start on
after
> the exterior handle, and the lock. Does one install the outer door waste
and
> the inner weatherstrip after the glass is in place or wouild it be easier
to
> do it before? Any ideas would be appreciated.
>
> Larry Ternowski
|