I have begun dismantling the rear of Tiny Tim in preparation to install
the Corvette Dana 36 diff that I have been building.
As such, I have several parts available that someone may be interested
in. Here is the list:
1. 2 SPAX adjustable shocks to fit a GT6 Rotoflex rear suspension.
2. A modified GT6 Rotoflex leaf spring. It has the safety ends cut off
for weight savings and the short leaf removed and a heavier full length
leaf installed on top of the main leaf to increase the spring rate.
3. CV-Joint conversion (by Clive Averill) that converts the Rotoflex
couplers to CV Joints, complete with custom made axles by Moser
engineering and Spicer U-Joints. (Outer stub axles fit the GT6 Rotoflex
rear uprights)
4. One inch aluminum spacer that mounts between the diff and road spring
to lower the rear.
I may have the Quaife available if the person who originally expressed
an interest in it passes.
Anyone interested let me know off list.
Regards,
Joe (C)
|