On Tuesday 01 June 2004 08:01 am, Chris King wrote:
> Those of you that have modified your 1500's with a hotter cam and/or
> better carbs, what distributor/advance curve are you using in
> conjunction with it?
>
This the advice I got from TSI over the phone, someone correct me if it sounds
wrong. With ~10:1 compression ratio, you can run up to 35 degrees of advance
at speed. The curve should start to climb rapidly as you come on the cam, or
you can set it up so that you get most of the advance as the cam starts to
kick in.
With that said the most advance I have seen in a dizzy is 23 degrees. Anyone
else have any ideas or thoughts?
_______________________
Bill Gilroy
77 MG Midget
|