I'm assuming that the GT6 mounts are the same as the spit. When I got the
doner car down to the frame I found that my RH mount was cracked and badly
bent. Looked like the PO bottomed the car out right on the bracket. I
pounded the bracket back into shape and welded the crack.
Looks as good as new.
Ken Copeland
70 GT6+ KC78784 (Future restoration, (Maybe a GT8))
70 Spit FDU84919 (Body doner)
70 GT6+ KC81551 (Future Spit GT)
71 Porsche 911T (Ok so I like 70s)
----- Original Message -----
From: "Jack Kagy" <jkagy@bpsom.com>
To: <spitfires@autox.team.net>
Sent: Saturday, January 10, 2004 6:34 PM
Subject: swaybar attchmnt
> As I was putting my '77 1500 on blocks for the winter, I noticed that the
> bracket intended to fasten the R side of the front swaybar to the frame is
> broken...not just the weld, but the bracket itself. I'm suspecting this
is
> serious, (especially after having done some "spirited" driving on a twisty
> road on the way to the car's winter home) I sure don't find the part
listed
> anywhere. Anyone else ever find a way to deal w/ this?
>
> Jack Kagy
|