spitfires
[Top] [All Lists]

RE: Oil pressure gauge

To: "'Joe Curry'" <spitlist@COX.NET>,
Subject: RE: Oil pressure gauge
From: "Craig Smith" <csmith1@awcwire.com>
Date: Thu, 4 Sep 2003 10:15:47 -0400
Mine is right below the dizzy, T fitting in the block using a nipple, the
electric unit is on one tap and the plastic line to the top and run to my
gauge in the dash.


-----Original Message-----
From: spitfires-owner@autox.team.net [mailto:spitfires-owner@autox.team.net]
On Behalf Of Joe Curry
Sent: Thursday, September 04, 2003 10:13 AM
To: 'David Mayer'; spitfires@autox.team.net
Subject: RE: Oil pressure gauge

-----Original Message-----
From: spitfires-owner@autox.team.net
[mailto:spitfires-owner@autox.team.net] On Behalf Of David Mayer
Sent: Wednesday, September 03, 2003 8:47 PM
To: celiracer81@hotmail.com; spitfires@autox.team.net
Subject: Re: Oil pressure gauge

Well...I'm an idiot.  So does anyone have pictures of their Oil pressure

gauge and where and how it attatches to the block?   I am pretty
confused 
right now.  Is there even supposed to be an oil pressure gauge?  It
looks 
like the existing one that the PO has on here is supposed to screw into
the 
spot where i guess is the temp. sender?

Please someone explain?
Again, I am sorry for my lack of knowledge (after all, this is my very
first 
rebuild ever).

Thanks,
  Dave
  '68 Spit Mk3

David,
What I did is remove the idiot light sending unit and take it to the
auto parts store and buy a "T" fitting with the same threads on the male
end and 2 female connections on the ends of the "T".  Attach that to the
block and screw the idiot light sender into one leg and the gage line
into the other one.  You will retain the idiot light as well as have the
gage to look at.

Regards,
Joe

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>