I would suggest once you have everything back together that you pump a
couple of big bottles of rubbing alcohol through the system just to be sure.
I used the bleed screws and my Mighty Vac.
Cleans your hands up too!!
-----Original Message-----
From: spitfires-owner@autox.team.net [mailto:spitfires-owner@autox.team.net]
On Behalf Of JohnZissler@aol.com
Sent: Thursday, June 12, 2003 4:27 AM
To: spitfires@autox.team.net
Subject: Silicon Brake Fluid
Hi Folks,
Well I have finally decided to go for the Silicon Brake
Fluid
and accompanying bits and pieces, namely the brake cylinder kits and m/c
kits
for both brake and clutch. The pipes on the car are completely dry so they
should not need cleaning out, the whole brake system has been cleaned. Oh
yes I
have ordered some steel flexi hose too, a complete set of four.
Is there anything else that I have forgotten?
Happy Spitting..................John (In the UK)
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|