I am putting my 73 GT6 back together and I don't know where all the vacuum
hoses go. If anyone has a 73 (the 72 is different) take a look and let me
know where all this stuff goes.
There is one port on the valve cover, one on each carb near the manifold
and I think these connect together and go to the canister.
There is one port on each carb near the air filter box and two ports on a
gadget that taps into the top of the intake manifold. I don't know where
these go and I don't know where to take the vacuum for the distributor.
I know that there was an antirun on valve that hooks in there some were and
one port on the canister goes to the fuel tank vent. All of the canisters
I have are three ports on top, but I think that is just the later design
and I will block one port. However, I am not sure about that. This thing
was already disassembled when I got so I have never seen it put together.
I have a lot of books, but none of them tells everything, not even the
parts book. The catalogs show the same as the parts book.
Pictures would be nice, but I can probably sort it out from a description.
Thanks, Sam
www.spit6.com
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|