Hi Dan,
thanks for your reply. My valve cover breather hose is connected to the
pcv which is fitted to the intake manifold.The PCV is sucking well and
I've checked the diaphram. If it is blow by wouldn't it be burnig blue?
Have you ever known a spit to start with out the choke from cold? Mine
does. I'm almost frustrated enough to throw the old single stromberg
back on...arg!
Cheers,
Bill
Dan Canaan wrote:
>
> At 02:33 PM 6/13/02 -0700, Bill McGarry wrote:
> >Hi All,
> >I need the benefit of your collective intelligence! I've got rebuilt
> >1.25" SU's on my '79. The jets are good and they're fitted with "Lean"
> >needles, shafts are tight etc., even when leaned right out I'm still
> >getting black exhaust smoke... when i remove the oil filler cap rpms
> >rise and there is far less smoking when i quickly blip the throttle.
> >By the way compression is 140 lbs. across all four cylinders.
> >Any clues on solutions?
>
> You might have hit the problem on the head with the oil filler cap. The
> engine should be ventilated. There should be a hose running from the valve
> cover through a PCV valve and into either the carb or the intake manifold
> depending upon your setup. Sometimes people will remove the PCV valve and
> that will let all oil fumes and vapor from the crankcase get sucked into
> the intake manifold and through to the pistons where you get nice oily
> smoke since that's what it is burning.
>
> -Vegaman Dan
> ---------------------
> This message has been sent by Dan Canaan, aka Flinthoof. All content is
> copyrighted by this individual for better or for worse, especially if there
> is mint involved. We thank you for your support. Please give mint to your
> local Mint Cross Center.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|