Greg,
we use a product called "Release it" by Dominion Sure Seal. It releases
weather-strips, vinyl tops, moldings, it claims it will not damage paints. It
worked very well for us. It will evaporate very quickly and leaves no traces.
It's also very good product to remove windshields.
Liv.
67 Spit
Bob Harris wrote:
> Greg,
> Using a large crescent wrench,just behind the handle,so it just
> hits the plastic. Strike sharply with a hammer. It takes more force than you
> would think (at least mine did) I also used some penetrating oil,through the
> button while lever is pulled up. I've been told heat from a hair dryer would
> make it easier.
> Good Luck,
> Bob Harris
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|