Hi Folks.
I recently installed a set of SS brake Lines and ran SS braided hoses to the
four wheel cylinders from the SS lines.
In the kit I received there were two pieces of tubing that didn't match up
with the set up on the 72 Spit.
The Vicky Brit Catalog (not who I ordered the lines from) shows the two pieces
as going from the rear cylinders to the flex hoses for the rear brakes. My 72
spit set up didn't use these, but ran the old rubber flex hoses direct to the
wheel cylinders.
Any inputs on what the proper plumbing should look like.
Thanks,
Frank D.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|