Hi, Bob.
The wires sound OK, it's the non-spinning bumpy thing at the bottom of
the rotor arm that is your problem. That cam is used by the amplifier
to decide when to generate a spark. If it doesn't turn, the amp never
generates a spark. Find out why it's loose, and you should have your
problem solved.
HTH,
Donald.
> From: Bobpcoe@aol.com
> Date: Sun, 29 Jul 2001 17:49:41 EDT
>
> I'm trying to get my rebuild running........ I have compression I have fuel
> but no spark.
> Should the aluminum body of the coil be grounded?
> Should I have 12 volts from the Pos and Neg side of the coil?
> At the base of the rota arm is a circular thing with 4 bumps sticking out,
> should this rotate with the roter arm? because it turns freely
> I can push it round with my finger ,when it passes that thing on the side it
> makes a spark jump from the coil .I had my hand on the coil and pushed that
> thing round it gave me a hell of a shock ...sure did wake me up!!!!!
> If anybody can take me through were wires should go It would be much
> appreciated.
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
|