Can also fill the pits with JBweld, smooth out with a
wet finger, then when set, sand smooth to give the
original sealing surface.
--- Atwell Haines <karbuff@optonline.net> wrote:
> Hi John,
...
> Try sanding the rough pitted metal. Then when
> re-fitting the hose put some
> gasket cement (or RTV silicone) inside the hose to
> seal it.
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
|