Hi Todd,
I got a reply from Rimmer Bros. that they no longer carry any of the
four or five sizes of spacers listed in their catalogue for my GT6+
rear hub. They do, however, still have the .003" shims. I'll either
have to call around to see if anyone still has some NOS on a shelf
somewhere or have a machine shop make one up. Maybe someone on the
list will read this who has an old hub which might have a spacer in
it. Mine appeared to be 0.148".
Thanks again for the heads up though.
Mike Ross
'67 Spitfire (soon to be a Spit 6)
'66 Spitfire
'69 GT6 (parts car)
'70 GT6
----- Original Message -----
From: "WILSON,Todd (Dewrsb)" <Todd.Wilson@dewrsb.gov.au>
To: <MIKEROSS@Prodigy.net>
Sent: Wednesday, March 21, 2001 8:56 PM
Subject: Shims
> Hi Mike,
>
> I happened to be looking through my Rimmer Bros dogalogue this
morning
> looking at bearing kits for rotoflex rear ends and noticed they had
shims in
> various sizes. Have a look at
>
http://rimmer-asp.aspectgroup.co.uk/catalog/default.asp?assemblyID=10
>
<http://rimmer-asp.aspectgroup.co.uk/catalog/default.asp?assemblyID=10
&subAs
> semblyID=10000048&Go=Go> &subAssemblyID=10000048&Go=Go
>
> Sorry, don't know of any local places.
>
> Cheers,
> Todd Wilson
> Application/Web Developer
> Australian Job Search - http://www.jobsearch.gov.au
> <http://www.jobsearch.gov.au/>
> DEWRSB
> Ext: 65292 | Phone: 02 6121 5292 | Fax: 02 6276 9356
> Email: todd.wilson@dewrsb.gov.au
> PERSONAL
> Mobile: 0412 378 516
> Email: t_c_wilson@bigfoot.com
> Web: http://www.gt6.com <http://www.gt6.com/>
>
>
> Notice:
> The information contained in this e-mail message and any attached
files may
> be confidential information, and may also be the subject of legal
> professional privilege. If you are not the intended recipient any
use,
> disclosure or copying of this e-mail is unauthorised. If you have
received
> this e-mail in error, please notify the sender immediately by reply
e-mail
> and delete all copies of this transmission together with any
attachments.
|