Hi Mike
I'm not sure but I seem to recall if you can't get the correct shims, you
can use the available shims for rebuilding the steering rack on most of our
cars, the ones that set the inner end of the track rod (inside the gaiter)
or the pinion preload (the big nut) of course some of the applications that
are described as shims start at 0.095" or there abouts in which case this is
not the answer to your question! 8-)
Graham,
1967 1300 FWD
1968 2000 Saloon
1972 2.5PI Saloon
1974 Sprinted Dolomite 1850
1975 Toledo in restoration!
http://www.triumph-iw.co.uk
http://www.mickdolphin.co.uk Spares Supplier.
----- Original Message -----
From: "Mike Ross" <MIKEROSS@Prodigy.net>
To: <spitfires@autox.team.net>
Sent: Wednesday, March 21, 2001 10:14 PM
Subject: Shims needed for rear hubs/bearings
|
| I'm replacing the bearings in my Rotoflex GT6+. The problem is that
| mine didn't come with any shims and it looks like I'll need them.
| Does anyone know where I can get them?
|
| TIA,
|
| Mike Ross http://pages.prodigy.net/mikeross/
| '66 Spitfire
| '70 GT6
| '68 Spitfire (body for GT6 convertible project)
| '69 GT6 (for project)
|