RE: Speed Bleeders!

[Douglas Braun & Nadia Papakonstantinou <dougnad@bellatlantic.net>]

At 08:00 AM 12/22/00 , Kaufman, Bob wrote:

>Here's the response I got from the company:
>The size(s) that you need for your application is as follows:
>SB3824

You need the "long" version of the 3/8x24 bleeder for the front calipers.
Otherwise the hex part will be too close to the caliper body to get
a wrench around it.

Doug Braun
'72 SPit