Despite all the catalogues and picture books, I still can't seem to
figure out the pollution plumbing between the tank, carb and canister.
I have
the vent pipe coming from the tank on the RHS of the car to - nowhere
a middle sized rubber hose coming from the left side of the carb to the
top of the canister,
a small rubber hose from the rear of the carb (next to the manfold)
blocked off with a 1/4" bolt.
Then I have a canister with
large hose connector at the bottom,
a medium size connector in the middle of the top and
a small connector at the edge of the top.
I can guess at some connections, but does anyone have the correct
plumbing description for this car. No run-on valve, no EGR valve, no
PCV valve (that I can see), no hole in the manifold for a rubber hose
connector as I see in many pictures.
Appreciate all replies!
Cheers, Fred
--
Fred & Wendy Griffiths,
Calgary, Canada
http://www.cadvision.com/griffco/index.htm
mailto: griffco@cadvision.com
|