Tony,
According to my Haynes Manual, the Stromberg 150 CD carburetor used on my
Mk2 GT6 does have a mixture adjusting screw underneath. Mine and the one
illustrated in the manual have a slot to insert a coin or large screwdriver
to turn for mixture adjustment.
The Stromberg CDSE emission-controlled carb on the Mk3 illustrated in the
Haynes Manual does have a plug where the 150 CD carb has a mixture screw.
The manual indicates that the emission-controlled carb requires the special
tool you described.
Mike Ross
'67 Spitfire (soon to be a Spit 6)
'66 Spitfire
'69 GT6 (parts car)
'70 GT6
----- Original Message -----
From: "Tony Gordon" <tgordon@saginaw-city.k12.mi.us>
To: "Mike Ross" <mikeross@Prodigy.net>
Cc: "spitfirest@autox.team.net" <spitfires@autox.team.net>
Sent: Saturday, July 22, 2000 10:32 AM
Subject: Re: Zenith carbs mixture adjustment?
>
> If you are using the standard Stromberg 150's, they do NOT have a an
> adjustment nut that is externally adjustable (are you thinking of SU's
that
> have a lower jet adjusting nut?). The large nut under the float chamber
on
> the ZS's is a purely a plug.
>
> The mixture adjustment is achieved by the use of the correct tool (looks
> like a very long allen wrench, with a small locking tool that stops you
> tearing the diaphram) inserted into the piston once the damper has been
> removed. Not all ZSs are adjustable (and I don't know GT6's well enough
to
> tell you if they are fitted with carbs that are). For more info, the
> Haynes, or Factory manual will give a good description, or the Haynes
> "Weber, Stromberg and SU carb" manual is a vertible font of knowledge for
> all Triumph owners.
>
> Tony
>
> >I tried to use my new ColorTune kit tonight on my GT6, but I couldn't
budge
> >the mixture control screws under the Zenith carbs. Does anyone know a
safe
> >way to loosen them so they can be adjusted?
> >
> >Mike Ross
> >'67 Spitfire (soon to be a Spit 6)
> >'66 Spitfire
> >'69 GT6 (parts car)
> >'70 GT6
>
|