Paul, guess I should have scrolled down the page a bit more the other day when
I got the prices!
Interesting parts. SS as well and in two sizes.
Alan
Original Message:
-----------------
From: wizardz wizardz@maxinter.net
Date: Thu, 6 Jul 2000 13:07:34 -0400
Subject: Re: Weld Breaks on SS Headers
APT sells ball joint exhaust pipe sections.
They work great where you have a moving engine
and a rigidly mounted exhaust pipe.
The trick is proper location.
http://www.aptfast.com/APT_Parts/Triumph_Parts/t_Exhaust_Headers_Systems.htm
and a photo of one at
http://www.aptfast.com/Images_Parts/Exhaust/A_Exhaust/SS_Ball_Joints.jpg
..don't ask me about seal quality... I've never had one in my hands.
Paul Tegler wizardz@toad.net http://www.teglerizer.com (new layout)
-----Original Message-----
From: alemen@pop.ftconnect.com <alemen@pop.ftconnect.com>
To: spitfires@autox.team.net <spitfires@autox.team.net>
Date: Thursday, July 06, 2000 11:53 AM
Subject: Re: Weld Breaks on SS Headers
Doug, I have seen sections of pipe that looked like that may be flexible in an
auto parts store. Only thing is they looked pretty long (about 6 feet). Never
looked to see if they have shorter section though. They did have the correct
"bellows" type shape. Probably in mild steel though. I'll look next time I am
in.
When I fit a new exhaust and header I would like to make sure that I don't get
cracks as well.
I would have thought that a muffler shop would have something universal that
they use in various diameters.
Alan
Original Message:
-----------------
From: Douglas Braun & Nadia Papakonstantinou dougnad@bellatlantic.net
Date: Thu, 06 Jul 2000 11:16:08 -0400
Subject: Re: Weld Breaks on SS Headers
I wish I could find a decent flex-joint that I could add to
my exhaust. Any leads, anyone? At one point, I had
a foot-long section of that cheesy spiral-wound flexible pipe
between the header and the main pipe, but it fell apart after
a couple of years.
If you look at the geometry of headers and how they attach to
the engine, you will see that a rigid header+pipe setup
can apply very high forces to the flanges, studs, etc...
Doug Braun
'72 Spit
At 10:31 AM 7/6/00 -0400, Teller.John@orbital.com wrote:
>My miserable 1985 Buick Somerset with a 2.5L 4 (completely unbalanced mind you)
>came from the factory with a welded together stainless steel manifold. After
>175K miles, it is doing just fine.
>
>The manifold is connected to the rest of the exhaust system through a flexible
>coupling consisting of a flange on the cat pipe and another on the manifold
>with
>a "doughnut" between them, all held together by two spring loaded bolts.
>Perhaps the flexible coupling is what keeps the stiffer stainless from breaking
>its welds.
>
>Most of the vehicles in the Import Car Tuning magazines at the grocery store
>use
>a fancy flexible coupling between their SS headers and the rest of the exhaust
>system. Probably for that very reason!
>
>--- JST
-------------------------------------------------------------------
This message has been posted from Mail2Web http://www.mail2web.com/
Web Hosting for $9.95 per month! Visit: http://www.yourhosting.com/
-------------------------------------------------------------------
-------------------------------------------------------------------
This message has been posted from Mail2Web http://www.mail2web.com/
Web Hosting for $9.95 per month! Visit: http://www.yourhosting.com/
-------------------------------------------------------------------
|
