you can do it yourself if you have access to a pedestal type drill. use a
wooden dowel rod with a square end, valve lapping paste (fine) .put a small
amount of paste on the rod (which is in the drill) start drill apply pressure
to the surface you are polishing stop drill, wipe off, look at the nice whorl
you made.
john cave
.
Tburke4@aol.com wrote:
> Hi Folks,
>
> I have come down with an urge to cover our 80 Spit dashboard with the
> machined surface found on early Jags and others. Does anyone know of a
> resource for sheets of such metal? I'm talking about the design that has a
> succession of circular "whorls" aligned vertically and horizontally across
> the surface.
>
> Thanks,
>
> Tom Burke
> 80 Spit
|