O/K the fuel pump is installed and operating, this is a NAPA 4/6 lbs pump, I
also installed a NAPA pressure regulator, one book calls for 1 lb of
pressure another calls for 1 1/2 lbs., I set it at 1 1/2 lbs. and have a
miss when I get into the accelerator, and also at high speed, this is a fuel
miss and not elec. should I set the pressure up to 2 lbs. or has anyone have
a elec. pump on their T/R and if so what pressure are you running. I have a
5/16" line from the fuel shut off valve to the pump & 5/16" to the pressure
regulator, then 1/4" around to the carbs, always been this way, just
wondering if this may have some effect on it, is 1/4" the correct size fuel
line for a T/R 3 ?? Thanks "FT"
|