Hello listers! Getting ready to adjust Spitfire valves for the first time
in 24 years today. Trying to remember a few things... Got a new cork
gasket for valve cover. I apply adhesive to the cover side only to hold the
gasket in place when replacing, right? Maybe smear a little grease on the
other side for good measure? I'm also replacing plugs, wires, cap, etc. I
have a new rotor, condenser and set of points, but provided that those items
look good and the points aren't pitted or show excessive wear, I should just
leave well enough alone there, correct?
TIA
Best wishes,
Jeff in San Diego
'67 RHD Spitfire Mk3 aka "Mrs. Jones"
Jeff's Classic '67 Spitfire Mk3 site & Vintage Spitfire Webring
http://www.ohms.com/spitfire/spitfire.shtml
home of the NEW Totally Triumph Auction
"By Triumph enthusiasts, for Triumph enthusiasts"
http://www.ohms.com/cgi-bin/TRauction.cgi
and... The Triumph Autos/Parts Wanted Listings
http://www.ohms.com/cgi-bin/TRwanted.cgi
...plus a few other surprises!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|