not that sounds real familiar... and I thought is was this
old crusty dial gauge.
-----Original Message-----
From: MikeC <mikech@sprynet.com>
To: Michael T. Altomare <MTAltomare@Prodigy.net>; Spitfire News Group
<spitfires@autox.team.net>
Date: Monday, May 01, 2000 8:04 PM
Subject: Re: Crankshaft Thrust Washers for a Spitfire 1500
>
>I have a set of the +0.005, they mic out at 0.0973". Manual says stock
size
>is 0.091 to 0.093".
>MikeC
>
>
>>
>>Does anyone in the group know what the thickness is on a set of
>>"standard" thrust washers? My catalogs show STD, 0.005 oversize, and
>>0.015 oversize, but do not provide the actual thicknesses of the
>>parts. Thanks.
>>
>>Michael Altomare
>>'77 Spitfire 1500
>>Kennesaw, GA
>>
>>
>>
>
|