My temp gauge does not work. The wiring is all OK, which leaves one of two
things. The Gauge or the transmitter. My car appears to have two of them? It
is a 1296 from a 69 MK3 placed in a 1963 Spit. On the thermostat housing
there are two sensors threaded into it. One on the Passenger side, where the
wire is hooked up, the smaller of the two. And one on the Driver's side of
the housing with no wire hooked up to it, a larger unit. Both appear to be
temp transmitters. Why would there be two and is there a way to test one to
see if it is bad? I hooked the wire up to both of them and no reading on the
gauge either way.
Thanks,
Jason
|