spitfires
[Top] [All Lists]

RE: Hood Prop

To: Craig Smith <CraigS@iewc.com>, "'Dave Chu'" <dave@ece.concordia.ca>
Subject: RE: Hood Prop
From: "Banbury, Terrence" <Terrence.Banbury@dnr.state.oh.us>
Date: Fri, 7 Apr 2000 14:20:06 -0400
Is this list great, or what?

> ----------
> From:         Dave Chu[SMTP:dave@ece.concordia.ca]
> Reply To:     Dave Chu
> Sent:         Friday, April 07, 2000 1:36 PM
> To:   Craig Smith
> Cc:   'Jjcousins@ra.rockwell.com'; spitfires@autox.team.net
> Subject:      Re: Hood Prop 
> 
> 
> 
> 
> In message <82C291F80EF7D311B2EE0090277A49F5039644@REXCH>you write:
> >
> >I have wanted to  do this for some time !
> >I hope someone has done it
> >
> >
> >Hello,
> >
> >My hood prop is shot.  Look in Vic Brit catalog...$40 !!!  I don't think
> >so.
> >
> >I will look for a used one but...has anyone thought of using one of those
> >pneumatic (sp) props they are putting in everything these days
> (hatchbacks,
> >mini-van hatches, trunk lifts, etc) on the Spitfire hood. (bonnet)?
> >
> >It seems like this could be a way to get around lifting-at-the-latches
> >method that rips the fenders to he$^.  No?
> >
> >Anyone?
> 
> 
>   I have done this on my Spitfire.  My car didn't come with the props,
> just
>   a 4 foot wooden stick.  I have an old Civic that was going to the scrap
>   yard and I took those and place it on to the Spit.  In order to get them
>   to fit I had to make a plate and to make the hole on the fender a little
>   bigger to mount the struts.
> 
>   The Civic struts are not really strong enought to hold up the bonnet
>   and I made a bracket to keep the struts inplace.  The idea came from
>   something I saw in the JC Whitney catalouge.  I never thought of taking
>   picture of it but I have a picture of my engine bay where you can see
> one
>   of the strut at the top left corner.  I have put a bicycle tire tube
> over
>   the expose part of the strut to prevent dirt from getting into it.  Here
>   is the link for the picture:
> 
>    
>     http://www.ece.concordia.ca/~dave/carpics/prop.jpg  
> 
> Dave                                                  |\ |     | |      
> Dave Chu                                 \/  \/       | /|     | |  
> Dept. of Elec. & Comp. Eng.                           |/ |     | |      
> Concordia University              Voice:(514)848-3115   Fax:(514)848-2802 
> 1455 de Maisonneuve W. H961       Email:dave@ece.concordia.ca
> Montreal, Quebec, Canada H3G 1M8
> http://www.ece.concordia.ca/~dave/addr.html
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~
> 
> 

<Prev in Thread] Current Thread [Next in Thread>