HI Brad
I would say if you can find one that is guaranteed good get the whole lot
and swap, if you can't then you will need to do the bearings before you fit
it anyway so rebuild the whole thing then just swap the units, least time
VOR. Make sure you get the right length shaft as there are two lengths!
Graham.
----- Original Message -----
From: <FODFARTS@cs.com>
To: <spitfires@autox.team.net>
Sent: Saturday, March 11, 2000 9:37 PM
Subject: 64 Spit rear axle
>
> I have had a vibration coming from the rear of my Spit and have finally
found
> the source. The right rear axle is slightly bent near the hub. What is the
> best way to remedy this? Should I just replace the axle itself or try to
find
> a complete assembly from a parts car? I have never dealt with this before
and
> it sounds like pulling the rear hub is a bit beyond me. Does anyone have
the
> parts I need and would be willing to part with them for a fair price? This
is
> the only problem that prevents me from driving the car and with the way
gas
> prices are headed, I would really like to get the car on the road this
month.
> THANKS!!
> Brad Wolfe
|