my experience has shown that as long as the rotor points to the right cylinder
with respects to the crank and the plug wires are all sorted, the housing can
be situated any way you want.
--- Mark Campbell <spitfire@shelby.net> wrote:
>
> Is it possible for the dist housing to be installed 180 degrees off and the
> distributer itself to be aligned correctly?
> The reason I'm asking is I need to retard timing on my 1500 engine and the
> vacuum advance is right up against the head (pointing directly toward the
> firewall) and I don't have any more room to spin the distributer.
>
> Mark Campbell
> 72 Spitfire
>
>
=====
nikolai jaremka
72 spitfire mkIV
east aurora, new york
Do You Yahoo!?
|