If you've got a 'worn-out' spitfire oil pump, use a
piece of scrap steel or alum to fashion a top plate
for it. Drill, tap holes for oil pump bolts, and an
exit port for cleaner fluid. Find a small motor
(electric fan), and connect the shaft of the motor to
the shaft of the pump with PVC tubing and tiny hose
clamps. Scrap 2x4 for a frame to hold it together.
Attach dishwashing spray hose (with valve taped or
wired open, or removed, for permanant flow)
--- "Smith, Brian" <brian_s@deq.state.la.us> wrote:
>
> Some asked about a parts washer....
>
> One day our hero is driving thru down when he spots
> someone throwing
> away a stainless steel double sink. Capt. ReCycle
> jumps in and save the
> forlorn sink. Later on our hero spies a kitchen
> counter in anouther trash
> pile. He correctly deduces that he now has the
> components for an
> inexpensive parts washing sink. He mounts the
> counter top on an avialable
> wall in his workshop and sets the sink in. Using
> 2x4 salvaged from pallets
> for support legs he now has a counter top and parts
> washer for the cost of
> nails. Our hero is still seeking the final
> component....a submersable pump
> for the Biodegradale parts washing solution. Stay
> tuned.......
>
> Brian H. Smith (aka Capt. ReCycle)
> Lake Charles, LA
>
>
Do You Yahoo!?
|