Hi Bob,
You have pretty much figured out the mystery. This wire is not
connected on the end near the starter solenoid (for 1978 models).
Some cars had this loose end snipped off, other were just coiled
up and tucked out of the way. Either way, it does (did) nothing.
For some strange reason, the seat sensor end was alway connected
to the harness.
Hope this helps,
Bob
Bob Berger wrote:
[...]
> But I could not find a home for one of the wires. It is a Black wire with a
> Blue stripe. It starts at the seat sensor and ends at the bundle near the
> starter solenoid. I'm not sure what the seat sensor is supposed to control -
> some of the mid 70's cars have an ignition lock - mine does not - but I do
> know that this wire needs to be hooked to something for the seat sensor to
> work.
>
> I know that I don't need this wire hooked up but it is a mystery that I would
> like to solve.
>
--
LBC'ing U,
Bob (& Spitfires)
http://home.att.net/~stan.part
|