spitfires
[Top] [All Lists]

Re: Black wire

To: Craig Smith <CraigS@iewc.com>
Subject: Re: Black wire
From: Joe Curry <spitlist@gte.net>
Date: Wed, 15 Dec 1999 10:17:24 -0700
Craig,
Black generally is used to identify a ground wire.  If everything is
working otherwise, this might be left over form a short some time aback
in the car's past.  So if nothing is otherwise wrong, it's probably ok
to just leave it.

Regards,
Joe

Craig Smith wrote:
> 
> I found a black wire that has been fried.
> It leads down to the ignition switch, I traced it back to the branch that
> goes into main through the firewall down low.
> I don't know what or where it leads, I really don't want to cut all the tape
> off the harness to trace it. I would like to just run another one and cover
> it on the harness.
> Any ideas ?
> 
> 
> Craig Smith
> Phone 800/692-2323
> Fax 864/234-1020
> craigs@iewc.com

-- 
"If you can't excel with talent, triumph with effort."
 -- Dave Weinbaum in National Enquirer

<Prev in Thread] Current Thread [Next in Thread>