Bob,
I bought a set of Spit pads from VB in '96 when I restored my Spit and
they have worked well since. They still have plenty of pad left. I
rebuilt the master and slave cylinders but not the calipers. I did
replace the rubber hoses with stainless braided ones. THat firmed up
the brakes extremely well.
Regards,
Joe
"R.D. Waid" wrote:
>
> Fellow Spitphiles,
>
> I'm wondering if anyone has comments/experiences about VB supplied front brake
> pads. A PO replaced the pads shortly before I bought my car in Aug. 96. It has
> always taken a lot of of pedal pressure to stop the car. I've assumed that
>it's
> a rear brake problem, but after a complete re-do of the rears and multiple
> adjustments, it's still almost impossible to lock the wheels up. The MC is
> recently rebuilt. I'm getting a lot of pad dust on the front wheels. I'm
> wondering if the friction material in the pads is soft, or glazed or..?? Any
> recommendations on a (brand name?)semimetallic pad or other brake system
>change
> that would help? What kind of brake pedal effort is neede in a properly set
>up
> Spit? Am I just spoiled by years of power brakes?
>
> TIA
>
> Bob Waid
> 71 Mark IV FK4081L
|