Ken,
My setup is the complete '69 Spit manifold and PCV valve. It is pictured on
page 83 of the Vicky Brit catalog SG.28. The valve is a friction fit in to
the hole toward the rear of the manifold.
Tony Childs
72 Spitfire - FK38809U
----- Original Message -----
From: Ken C <kenwc@pacbell.net>
To: Spitfire List <spitfires@autox.team.net>
Sent: Thursday, September 02, 1999 5:41 PM
Subject: Re: New carb setup
>
> Tony, you're right. The plugged port must be the one normally the ECV goes
> to. BTW, which one do you use, Vicky Brit shows a couple of different ones
> available.
>
> Dave, guess I'll leave the canister in place. Boy, coulda saved all that
> weight too !! <BG>
>
> OK, opened up that port, (just a freeze plug), and it's about a 1/2"
> non-threaded hole into the manifold. So now just have to figure out the
best
> way to connect the ECV to the manifold and another part of the puzzle will
> have been solved !!
>
|