DO you notice any more power? <grin>
__/__,_
_____(_o___o_)_______________________
/ \
| Michael Graziano |
| Long Term Capital Management L.P. |
| Phone: 203-552-5706 |
| Fax: 203-552-5869 |
| Email: mgrazian@ltcm.com |
\_____________________________________/
-----Original Message-----
From: Joe Curry [mailto:spitlist@gte.net]
Sent: Wednesday, August 18, 1999 5:04 PM
To: Simmons, Reid W
Cc: spitfires@autox.team.net
Subject: Re: water injection
Reid,
I have water injection on Huxley the Spit. It wasn't intentional; it
only goes into effect when it rains and water is sucked into the air
cleaner I have mounted in front of the radiator! 8^)
Joe
"Simmons, Reid W" wrote:
>
> Yeah, water injection. Didn't passenger jets use water injection during
> take-off for increased power? I also seem to remember J.C. Whitney
selling
> something like a water injection system for increased power (and fuel
> mileage?) back in the 60's. It was one of their "wiz-bang,
> plastic-fantastic, gadgets of the month".
>
> Reid
> '79 Spitfire (original owner)
>
> -----Original Message-----
> From: David Brock [mailto:davidb@ilx.com]
> Sent: Wednesday, August 18, 1999 11:46 AM
> To: spitfires@autox.team.net
> Subject: RE: decarburizing(?)
>
> The water trick is what I watched my mechanic friend do in the first weeks
I
> owned Bev- except it wasn't sprinkled in- we actually poured over 2 litres
> (half gallon) through the carb throat over the course of about 90 seconds.
> As long as the revs were kept up, it didn't stall, and the black & white
> smoke from the tail pipe, he said, was the soot and steam, depending on
> whether the engine happened to be revving high or low at that moment.
>
> This cleared up a nagging run-on problem which, he said was due to
> superheated (glowing) carbon deposits in the chambers. Of course, all
> disclaimers apply.
>
> ;-David
>
> -----Original Message-----
> From: wizardz [mailto:wizardz@maxinter.net]
> Subject: Re: decarburizing(?)
>
> ..another method (although I am sure some will balk at it) is to
> sprinkle/sprits
> water down the throat of the carb while the engine is at operating temp.
and
> running.
> ...be careful if you do it this way.... too much water too quickly stalls
> the engine
> and can possibly cool the engine components too quickly.
> But at the same time this is what breaks the carbon loose. The warm metal,
> vs the sudden cooling effect
> on the carbon from the water, cracks it and it blows off.
>
> (as usual... no warranty expressed or implied... YMMV my $.02..)
--
"If you can't excel with talent, triumph with effort."
-- Dave Weinbaum in National Enquirer
|