Ken,
I've noticed that there are 2 different luggage floor lengths in the GT6 -
one is long and the other is short, and the difference is about 6 inches.
My GT6 (KC80064L) had the short length floor. Another parts car I had (and
I don't know the Comm number) was older and had the longer floor. Maybe
this was to accommodate the optional rear seat in the GT6, but my car did
not have that option.
There was a large bracket/bar type of thing that went from wheel well to
wheel well upon which the floor was bolted and snapped into. This bracket
was bolted to brackets that were welded on the wheel wells. I'm not sure
whether there were different brackets were used on the two lengths of
floors.
Anyway, you may have original floor panels.
Michael
michael_bayrock@translink.bc.ca
-------
Date: Thu, 5 Aug 1999 12:27:41 EDT
From: KHOCO@aol.com
Subject: GT6+ luggage floor length
GT6ers
I need to know the length of the luggage and gas tank floors.
Either from damage or some unknown reason the DPO removed the luggage floor
support rail and replaced it with a piece of angle iron. To assure that I
wouldn't be able to get the new rail in the correct positition he also cut
the luggage floors back by at least 6 inches. I need to know the exact
length
of the floor from front to back.( Or back to front :>).) As always TIA.
Ken Copeland
70 GT6+ KC78784
70 Spit FD084919
|