In message <005601beb35b$aaa839e0$a21e66ce@9>you write:
>
>I need to hook up the alternator in my spit-6 autocrosser. All the original
>wiring is long since gone (removed hastily with no notes on where anything
>goes - oops) I have one of the Lucas alternators with the three connector
>plug-in. It has the black plastic cover on the back.
>
>I looked at the wiring diagrams on the web page that someone posted (very
>nice, BTW), but they appear to have a two wires coming from alternator, and
>one of them goes to a "control box", whatever that is (regulator??)
>
>I don't claim to know how this stuff works, but I can hook wires up if I
>know what needs to be connected to what. Anyone out there have some ideas?
>
Hi Greg, the connector is consist of three female connectors, two 3/8"
and one 1/4". The thick brown wire with the 3/8 connector goes to the middle.
The small 1/4" brown/yellow goes to the left side and the small brown wire
with the other 3/8" connector and goes to the right side (or outter most).
Dave |\ | | |
Dave Chu \/ \/ | /| | |
Dept. of Elec. & Comp. Eng. |/ | | |
Concordia University Voice:(514)848-3115 Fax:(514)848-2802
1455 de Maisonneuve W. H961 Email:dave@ece.concordia.ca
Montreal, Quebec, Canada H3G 1M8 http://www.ece.concordia.ca/~dave/addr.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|