At 09:46 PM 3/31/99 -0500, Chris Taylor wrote:
>
>I was checking my light functions tonight to see if
>everything worked after swapping frames on my
>75 Spit and discovered that the four way flashers
>only work on the driver's side of the car, however
>the turn signals work on all four corners. Can anyone
>tell me what could be causing this. Is it a burned out
>flasher module
Most likely. Although, you DID clean and hook up all the connections
(including grounds) between the chassis & body?
or have I screwed up the wiring somehow?
Well, IIRC the flasher switch is connected by a plug, so it's always a
possibility that the contacts are dirty or something...
FIRST TRY THIS
Something that works (and a good procedure to do as "maintenance" ) is to
actuate the 4-way flasher switch 10 or 12 times, at least once a year.
This will assure that the contacts for the flashers and turn signals work OK.
Atwell Haines
'79 Spitfire
"If you got into a taxi and the driver started driving backward,
would the taxi driver end up owing you money?"
|