Hi,
I know that this problem has been talked about before, but if someone could
help me out I'd appreciate it. I noticed today that my alternator was not
charging while looking for another problem, I had heard that if the
warning light bulb was blown that this would happen. I checked the bulb
and sure enough it was blown. I replaced the bulb, but I still don't get
any output and the bulb does not light when I turn the key to the on
position. I have 12 volts on the white wire through the bulb and at the
brown and yellow wire at the alternator. I dob't see any path to ground
though for the current to flow and light the bulb. If anyone could explain
how this normally works I would appreciate it.
Thanks,
Glenn
|