Glenn, my Haynes says remove the plug, replace with a grease nipple and
use grease. That is the job I've got to do this weekend...replace right
rear trunnion bushings.
Vic Whitmore
76 Spitfire
Thornhill, Ontario
Glenn Trunnell wrote:
>
> Hi everyone,
>
> I am currently rebuilding my rear suspension and am in the process of
> replacing the rear trunion bushings. My question is: are these nylon
> bushings lubricated either during the installation or later. The grease
> nipple on the rear trunions seems to only provide grease to the axle as it
> passes through the trunion. I don't see any passage for grease to the
> bushings. How about the front trunion bushings? I know that you use 90w
> oil in the grease fitting but how about on the bushings? Thanks for any
> advice.
>
> Glenn Trunnell
> 79 Spitfire
|