Thanks guys! I traced my non-functioning indicators to the hazard light switch
knob being too tight of all things. I found that if I unscrewed the knob a
turn
or so, everything works fine. I don't know how permanent a solution this will
be, but it's working for now - got to get him inspected quick! ;-) Indicating
left is still a bit flaky, once in a while it will blink dimly for a while
(wiggling the wires to the column switch cures it) - I am going to go through
the connections tomorrow with cleaner and contact enhancer.
Thanks again!
Kevin Rhodes
Freddy the Spitfire
|