To use the Sable hood I think that you will need the under hood bracing from
the SHO to clear the intake & DIS. I know on the Gen 1 the hood strut mount
will hit the DIS unless it is bent away and then the strut will not work.
Ken
----- Original Message -----
From: "G Kerby Haltom" <g.kerby@sbcglobal.net>
To: "Brad Corradi" <bcorradi@yahoo.com>; <shotimes@autox.team.net>
Sent: Wednesday, August 02, 2006 8:35 AM
Subject: Re: [Shotimes] Parts Interchangeability
> Headlights are Sable units. I think the marker lights are, as well. But
> not the little "fillers", commonly refered to as fishtanks, next to the
> headlights. Those are SHO specific.
>
> 2) I believe that piece is the same for all Tauri and Sables.
>
> 3) Hood is a Sable piece
>
> 4) I forget, but is probably Sable as well.
>
> I don't have a Gen II, so somebody with a Gen II will chime in. But most
> parts are either stock Taurus or Sable.
>
> Kerby
>
> Brad Corradi <bcorradi@yahoo.com> wrote: Hello all,
>
> I have a red 1995 SHO that hit a parked car a few weeks back and i was
> curious to see what parts are interchangeable with a regular taurus. I
> need to replace the following parts.
>
> 1) Both headlights and marker lights - i don't believe these are
> interchangeable
> 2) Channel Tube piece that is behind the bumper cover
> 3) Hood
> 4) Headlight/grill support/mounting panel - I assume this isn't
> interchangeable if the headlights aren't?
>
> Thanks for any responses,
> Brad
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|