Alan:
We (the SHO community) are down to only 5 out 10 molded hoses being
available for the SHO. Either MTX or ATX. RCM has the five that I know are
still available. The two big upper and lower radiator hoses. The U-shaped
oil cooler hose and the two heater hoses that attach to the heater core at
the firewall.
http://home.earthlink.net/~rcm_automotive/id15.html
Josh at SHO nut has only 3 hoses listed anymore.
http://www.shonutperformance.com/
Cincy SHO (are they part of Bittersweet now?) has only the two big radiator
hoses.
http://www.cincysho.com/Taurus_SHO/Ford_SHO_Catalog/60k-Maintenance.htm
I recently just went through a total hose replacement. I brought the 5 old
hoses not available down to the local O'Reilly auto parts store and just
matched up shapes as best I could and then cut them to fit. Not perfect but
it's all we have. Last time I checked Ford had nothing available.
.
.
> There are two coolant hoses on the radiator side of the engine, one a
> short
> u-shaped piece that starts and ends adjacent to the oil filter, and one
> that
> starts up by the t-stat area and terminates near the oil filter. Does
> anyone know if either or these is available aftermarket? Or still
> available
> From Ford?
>
> Thx.
>
> Alan
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|